Sunday, February 3, 2019

I'd Rather Be Fishing

Hi! After all the cold weather, I am really looking forward to camping and fishing. I made this card using an older Teddy Bo stamp.


I stamped the image, scanned it, sized it to 4.5 inches and printed it out in brown on 4 by 5.5 inch cardstock so I would get a no line effect. I colored the image using Spectrum Noir Alcohol Markers and added accents with gel pens. The background is light blue chalk and light blue dots. 


The card is large at 5.5 by 8 inches. The base is an old olive cardstock from Stampin Up. The light colored hook patterned paper mat is "Hooked" by Match 'em Ups" and is cut at 5 by 7.75 inches.
The smaller fish print mat is "Green Fish Texture" by Karen Foster, and is 4.5 by 6 inches. The image was added to this mat so it was centered at the top and on both sides, There will be a 1.5 inch strip of the fish print showing below the image. Then center this mat on the larger mat. All the layers are then centered on the card base.

A strip of Fishing themed ribbon was wrapped around a 1 inch by 5.5 inch strip and then added 5/8 inch up from the bottom of the card. Finally, I added a bucket of fish from Jolees and a fishing pole from K and Company .


Thanks for stopping by! 
Have a great crafty day!

Shirley

Friday, February 1, 2019

Knitting Anna


      Hi! Today is New Release Day at Little Blue Button Stamps and my card uses the adorable image, "Knitting Anna."




I started with a 5 by 6 inch base card made from a striped pattern from the Confetti Stack from DCWV.  The image was printed at 3.75 by 4.75 inches and the mat is 4 by 5 inches.  The image was colored with Prismacolor Pencils to resemble my granddaughters' kitties. I cut a 5 inch by .75 inch triangle from the open bottom section of the card. I used the same shape to cut a triangular notch from the bottom of the image and the light yellow mat. Small holes were punched .5 inch down and .25 inch in on each side of the front of the card. Punch holes were also made at 3/8 inch down and 1/4 inch in on the matted image.  I mounted the image 1/8 inch down from the top fold  and centered at the sides, then light yellow thread is threaded through the holes and tied in the middle.

Finally, I made two 1.5 by 2 inch knitting balls and needles using an image from Cricut. These were added near the bottom on each side.

I love this sweet image with Anna and her two furry "helpers."

Thanks for stopping by! 
Happy coloring!







Saturday, January 19, 2019

Heart Top Treat Box


H1! It will be Valentine's Day before we know it, so I made this cute little Heart Top Treat Box.


I used Heart Top Treat Boxes & Tags from My Scrap Chick for my box. I also used an older image from Magnolia and a scalloped oval from Cricut.

The main part of my box is 5 3/8 inches tall (excluding the heart closure at the top). I cut the box from cardstock included in the "Uptown Flair Glitter Stack" from the paper studio. I used glitter cardstock from Recollections for the mats and hearts at the closure.

I used a second smaller heart print from the same stack for the band around the box, then added a band of green gems. I added three mats in graduated sizes from 4 1/2 inches to 4 inches.




 Four hearts were cut from pink glitter cardstock and added to the closure flaps at the top.




 The image was uploaded to Design Space and printed out at 3 1/2 inches. She was colored with Prismacolor Pencils. I used a sewing needle and a double strand of pink thread to add a string to her heart banner. She was added to the mats with foam tape. Two little paper flowers were added at her feet.


I love this sweet little box! 
Thanks for stopping by!

Shirley


Monday, January 14, 2019

Tea Time

Hi! I find a good cup of tea so relaxing on a cold January day, don't you?


I made this sweet little easel card using Teapot Card and Envelope and an oval easel card base from Easel Card Collection. Both files are from My Scrap Chick.

Easel Card Collection: click to enlarge                                                                Teapot Card and Envelope: click to enlarge       

                                                         
The image is from Magnolia and was colored with Spectrum Noir Alcohol Markers.



I made the card from Cardstock from the Samantha Rose Stack from DCWV along with some scraps from my paper stash. I omitted the card layer of the file, and attached the teapot to the easel card base, I attached the image and the sentiment with foam tape, then added paper flowers, a tiny butterfly, and an aqua bow as accents.

You can turn any shape into an easel card by attaching it to an easel card base from My Scrap Chick. Give it a try. I have to admit that I have a special fondness for easel cards.

Thanks for stopping by.
Happy Crafting!

Shirley

Friday, January 11, 2019

RDS Skating Shape Card


When I was growing up January always meant skating at the local outdoor skating rink.


I used Rag Doll Sweetheart Skating from Little Blue Button Stamps and a skate image from Cricut for my shape card. I welded two five inch bottom layers of the skate together, back-to-back.



You can find the file in Design Space here:
https://design.cricut.com/#/design/121204224
If you do not already own this skate file it will cost you $.99.

 I laced the skate with 3/8 inch aqua ribbon and tied it at the top. I added snowflake stickers and gems onto the card.


I printed the image at 4.5 inches and colored her with Prismacolor Pencils. After I fussy cut her out leaving a small margin of white, I added her to the card with foam tape.


Thanks for stopping by!
Happy Winter!






Tuesday, December 18, 2018

3d Poinsettia Ornaments

Hi! I've been busy making these beautiful 3 d poinsettia ornaments.



I used three files from My Scrap Chick for this project.




Materials

Silver and white glitter cardstock
Rose red, green and light green, and light grey cardstock
white ivy embossed cardstock
3/8 inch wide poinsettia ribbon
light green seed beads
glue and adhesives

Adhesives used

I made the Scalloped Oval Tag Layers 4.5 inches tall. I omitted the smallest layer. The bottom layer is silver glitter cardstock, the second layer is light gray cardstock, the third layer is white glitter cardstock and the top layer is embossed vine white cardstock. I inked all the edges in gray. I put the layers together using foam tape between the top two layers and the bottom two layers. I glued the other two layers together.

Watch the video to see how the flowers are put together.


I used a pick to make a line on the back of the flower pieces which made the creasing of the petals easier. I curled the tips of the petals like I would to curl ribbon.


 I used foam squares between the layers instead of wire and glue. I used a single layer of foam squares between the layers of the flower and a double layer of foam squares between the layers of leaves.

I added a generous dollop of glue to the middle of the yellow flower centers and added about 6 light green seed beads.


I cut an 8 inch piece of 3/8 inch wide poinsettia print ribbon, folded it in half and tucked the ends between the bottom two layers at the top of the oval layers. This was held in place with glue dots and liquid glue. I then made and attached a small bow made with the same ribbon.




I love how these turned out! They look so much better in person. 
Thanks for stopping by. I'd love to hear what you think. 

Merry Christmas!

Shirley









Tuesday, December 11, 2018

Caroling Kids Easel Card



Hi! There is still time to get those last minute Christmas cards made. Today I'm sharing an easel card made with the sweet image,  Caroling Kids .


My easel card was made using a card base from Bird's Cards.
I colored the "Caroling Kids " using Prismacolor Pencils and added a light-post paper piecing behind the image.



 The large snowflake was cut from pearlescent and glitter cardstock. The sentiment, from Cricut, was added to a snowflake and pearls and glitter snowflake stickers were added as a final touch.


Thank you for looking! Have a great crafty day!

Merry Christmas!