Girl Bunny Box

Hi, Easter will be here before we know it, so I have been busy making this cute little girl bunny box. 

I used Bunny Hat Box from My Scrap Chick  for my box.  I left off the bird and made my bunny from Fun Foam.

MATERIALS

 Bunny Hat Box file from My Scrap Chick

White poster board

9 by 11 inch white Fun Foam

Pink Cardstock by Coredinations

Bunny printed Cardstock by DCWV

Pink glitter cardstock by Coredinations

Black and white cardstock scraps

Pink Mulberry Paper Flowers by Prima

Small pink flower gem by Jots

1 1/2 inch wide sheer pink ribbon

5/8 inch wide gathered white lace trim

Xyron, glue, glue runner

Light blue and pink ink pads

0.4 black Cricut marker

White Gelly Roll pen

I made the box slightly larger than it imports, using white poster board for the body.  I used a combination of glue and glue runner and paper clips to hold it together while it dried. I cut the face panels, muzzle and ears from Fun Foam, inked the edges, and ran them through a Xyron before attaching them. The eyes were accented with the black Cricut marker and the white Gelly Roll pen.

The outer ears were attached to the pink ears pieces.

The ear pieces were attached to the hat base one at a time. 

I lined the ears up so they matched and attached them together. ( I used clips to hold the ears together, but the clips left marks, so I would use a different method next time.)

I attached the hat brim, then using glue runner and glue I added the gathered lace around the outside edge.

I added the printed panels that were inked along the edges with pink. I folded the pink ribbon in half, wrapped it around the hat as a hat band, then tied it into a bow. I added a double layered flower with a pink flower gem in the center, just above knot of the bow.

Isn't this Bunny Box the cutest thing? I love how it turned out! 

Thanks for stopping by! I'd love to hear what you think.

Shirley

Mad Hatter Bunny Hat

One of my favorite files from My Scrap Chick is  the Uncle Sam Hat Box. I love figuring out new ways to use this versatile file. This time I used it to make a Mad Hatter Bunny Box.

MATERIALS

Uncle Sam Hat Box
Bunny Top Hat Box (for the ears)
Jam Jar and Candle Gift Wrap (for the bow)
 Pixey Stix Glitter Pack by the Paper Studio
Grey felt from The Summer Sky Set by Cricut
Raspberry Confetti Peel & Stick Foam Sheet by Foamies
Paper Flowers by Jots
Butterfly Paper Accents by K & Company
Blue Diamond Wrap by Floral Garden
Small white silk flower
1/4 inch wide green ribbon

I made the hat following the PDF instructions. See how I put the hat together here: https://scrappysamdesigns.blogspot.com/2017/12/frostys-top-hat.html  I cut each of the long strips in half diagonally and alternated gluing them to the top and bottom of each section of the hat starting with the bottom section of a notched section. (See picture below.)

I made 6 inch ears using the Bunny Top Hat Box file. The larger piece was cut from grey Cricut felt and the inner ear was cut from the raspberry confetti foam.  I cut one inch off the bottom then glued the ears to the front of the hat. I cut a 1 inch by 9 inch strip of the blue dot cardstock and wrapped it around the base of the hat gluing it together in the front. I then made a 4 inch bow from the blue dotted cardstock and the bow from Jam Jar and Candle Gift Wrap, and wrapped the center with the blue Diamond Wrap. The finished bow was attached in front of the ears with foam tape and a little white silk flower was attached below the bow.

I made a bow from the ribbon and added the bow and a blue flower to the back with foam tape. A butterfly accent was added to the top of the inner box.

The inner box lifts out. This will make a cute Easter basket for one of my granddaughters.

I love how this little Mad Hatter Bunny Box turned out! What can you make with the Uncle Sam Hat Box?

Thanks for stopping by!

Shirley

Valentine Fairy Bear Booty Box

Valentines Day will be here before we know it, so it's time to get those projects for our loved ones finished.

I created this adorable booty box using the following files from My Scrap Chick.

Fairy Bear Girl Booty Box 

Triple Hearts Card Set

Be Mine Card Set

I Heart You Card Set

XO Hugs and Kisses Card Set

Rosettes Scallop Edge

FAIRY BOOTY BOX

Materials

Fairybear Girl Booty Box

pink, red and white  and green glitter cardstock by Colorbok

tan and pink pearlescent cardstock by Recollections

white and black glossy cardstock scraps

pink heart gems and pink round gems

inks in coordinating colors

black and white fine tip pens

adhesive and foam tape

The bear as made from tan pearlescent cardstock and the cheeks, flowers, collar and large wing was made with the pink pearlescent cardstock. The belly, flower, small wing and flower centers were made from pink glitter paper. The flower base was made from green glitter cardstock. All pieces were accented with coordinating inking around the edges. The gems were added to the collar. The finished box is about 6.5 inches tall and wide.

VALENTINE PICKS

Materials

MSC files found here, and here.

Red, pink and white glitter cardstock by Colorbok
Pearlescent pink cardstock by Recollections
Uptown Flair Glitter Stack by the Paper Studio
Pixy Stix and Peanut Butter Hearts by Palmer (I found both at Dollar Tree)
2 inch heart punch
shish kabob skewers
1/4 inch wide pink ribbon
red glitter heart picks (optional)
Double sided tape, glue
paper clips

I made each pick about 2.5 inches wide, then duplicated each one and flipped it horizontally. I then used a combination of double sided tape and glue to attach a Pixy Stix between the two layers, then held them together with paper clips while they dried.

I used the Rosettes Scallop Edge for the heart candy rosettes. I followed the PDF tutorial included with the file and made each one about 3 inches in diameter. ( You will need two strips at 1.5 inches for each rosette.) I used the heart prints from the Uptown Flair Paper Stack for the rosettes. 

I turned the rosette to the back and glued a 6 inch stick into one of the valleys, then glued a 2 inch punched heart over the hole in the center.

I added double sided tape to the stick one inch from each end, then wrapped 1/4 inch pink ribbon around the stick. I then tied a bow around the top below the rosette.

I turned the rosette over to the front.

I added several strips of double sided tape to the back of the candy heart, then attached it to the center of the rosette.

I added some floral foam to the booty box, then poked the picks into the foam. I also added two red glitter picks to the box.

I love how this Valentine Fairybear Booty Box turned out!

I hope you enjoyed my little project. Have a wonderful Valentines Day!

Shirley